TESTING: WOOLSAFE TEST METHODS

CCP 1

• Sampling and preparation of test sample (BS 4808: Section 1.1)
• Standard procedure for obtaining a representative sample for subsequent testing

CCP 2

• Method for the detection of oxidising agents (BS 4088: Section 1.1)
• Addition of potassium iodide to an acidified solution of the product and in the presence of any oxidising agent, causes liberation of iodine to give a yellow-brown colour, or blue with the addition of starch solution

CCP 3

• Method for the detection of reduction agents (BS 4088: Section 1.1)
• Acidification of a solution of the product, followed by heating of the solution, causes decoloration of potassium permanganate solution in the presence of a reduction agent

CCP 4

• Method for the detection of additives in carpet cleaning products
• Fluorescent brightening agents are detected under UV light using CCP 16 (see below); colour and perfume are assessed subjectively; the presence of other additives is noted

CCP 5

• Determination of alkalinity (BS 4088: Section 1.1)
• Observation, using a pH meter, of the neutralisation of an alkaline product at working strength by titration with acid

CCP 6

• Determination of pH (BS 4088: Section 1.1)
• Dilution of the product to working strength followed by the electrometric determination of the pH at 20°C; determination likewise of the pH of the product as supplied, or its aqueous extract (powder products)

CCP 7

• Determination of the non-volatile components of cleaning formulations
• Determination of the percentage solids left after evaporation of the volatile part of the product

CCP 8

• Cleaning performance tests
• Specimens of carpet are soiled in accordance with CCP 17 (see below) and are then cleaned using the product under test

CCP 9

• Determination of the resoiling propensity of carpet maintenance products (BS 4088: Section 1.1)
• Specimens of carpet are pre-cleaned with the cleaning product and soiled according to CCP 17; the soiling level of the cleaned and soiled product is compared with that of the original, not cleaned, carpet

CCP 10

• Evaporation residue and dust adhesion - plate tests
• The product is evaporated to dryness and the physical characteristics of the residue are assessed; assessment involves tactile judgment and observation of adhesion of standard soil

CCP 11

• Colour fastness test (BS 4088: Section 1.1)
• Specimens of standard undyed wool and nylon fabrics in contact with a specimen of standard wool carpet are immersed at 37°C, under pressure, in the product under test at working strength; separation and drying of the components allows assessment of staining and colour changes of the fabrics. The device used for this test complies with the recommendations laid down in ISO 105 - A04

CCP 12

• Flammability of aerosol foam shampoos and absorbent powder formulations (BS 4088: Section 1.3)
• Ignition tests on a blanket of foam, or cleaning formulations in powder form, indicate whether the product is flammable

CCP 13

• Oil wicking test for carpets
• The wicking characteristics of a coloured oil are used to indicate whether or not a fluorochemical finish has been applied

CCP 14

• Assessment of the efficiency of stain removal products
• A standard carpet is spotted with a range of staining substances and after given periods of time the stains are treated with the cleaning or spot removal product under test and the efficiency of removal is assessed

CCP 15

• Assessment of the staining propensity of textile floor coverings treated with soil or stain resistant finishes
• A standard carpet, treated with the product under test, is spotted with a range of staining substances and after given periods of time the stains are subjected to standard stain removal treatments; the efficiency of the removal is assessed

CCP 16

• Determination of of the presence of fluorescent brightening agents
• The product under test is applied to a multifibre test fabric under standard conditions and any fluorescence is determined under UV light

CCP 17

• Method for assessing the soiling propensity of textile floor coverings (ISO 11378 - 1)
• Carpet specimens are subjected to an accelerated soiling process on the Kappasoil laboratory soiling machine; the level of soiling is determined by colour difference measurement

CCP 18

• Standardised cleaning test for textile floor coverings (ISO 11379)
• Specimens of carpet, soiled according to CCP 17, are cleaned in a controlled manner using a spray extraction cleaning machine of defined characteristics

TM 258

• Method for assessing the oil and water repellency of textile floor coverings
• Drops of various standard oils and water/alcohol mixtures are placed on the surface of the textile floor covering under test; the result is dependent on the extent to which the drops bead on the surface or soak into the floor covering

TM 282

• Method for assessing the staining propensity of textile floor coverings (Wool Research Organisation of N Z Test Method)
• The staining propensity of textile floor coverings are assessed in the 'new' and in the 'used' state, i.e. before and after having been subjected to (simulated) foot traffic; quantities of standard staining substances are placed on the surface of the floor covering, left for various periods of time, subjected to standard stain removal treatments and the levels of stain resistance are then assessed

TM 136

• Method of test for the determination of dichloromethane soluble matter in textiles (Wool Research Organisation of N Z Test Method)
• The standard soxhlet extraction technique for textiles to determine oil, grease and other extractables

Test Methods and Standards quoted

ISO 105

"Textiles - Tests for colour fastness -

Part A: General principles
Part A01: General principles of testing
Part A02: Grey scale for assessing change in colour
Part A03: Grey scale for assessing staining
Part A04: Method for the instrumental assessment of the degree of staining of adjacent fabrics

BS 4088

"Carpet cleaning products -

Part 1. Methods of sampling and test - Section 1.1 General methods for formulations used in liquid form
Part 1 - Section 1.2 Determination of cleaning performance of formulations designed for use in spray extraction machinesPart 1 - Section 1.3 General methods for impregnated powder formulations
Part 2. Specification for high foam formulations used in liquid form
Part 3. Specification for spray extraction machine formulations used in liquid form
Part 4. Specification for impregnated powder formulations"

ISO 1378-1

"Textile floor coverings - Laboratory soiling tests - Part 1: Kappasoil test"

ISO 11379

"Textile floor coverings - Laboratory cleaning procedure using spray extraction"

TM 136

"Dichloromethane extractable matter in wool textiles"

TM 258

"Oil and water repellency of textile floor coverings"

TM 282

"Staining propensity of textile floor coverings"